SB 10EPC Economical Portable Conveyor

The most portable and adaptable conveyor system to satisfy any configuration. You can set them up on tables, tripods and even on the ground. There is a possibility of two different power units in three different configurations. The "V" guide under the belt assures continuous tracking and alignment. This system is equipped with a low maintenance power transfer (transfer casing).

There is no limit to the length of your conveyor line, you just add a power unit!

Belt Speed: 0 to 82 feet per minute

Power : 120 and 220 volt single phase 60HZ

               1 X 1HP motor, 10 Amp. Drive

Variable speed forward/reverse with weight load specs:

150 lbs per section/1200 lbs per 100 feet

75 lbs per section/900 lbs per 150 feet

Dimensions:

Length: 12.5ft (3.8m)

Width: 12in (30cm)

Weight conveyor unit: 84 lbs (38 kg)

Weight SB 10DPK ppwer unit: 48 lbs (22 kg)

Weight SB 10PK power unit: 41 lbs (18 kg)

 Options:

- SB 10PCW Portable conveyor wagon

- Motorized belt transfer corner

- Guide rail corner guide

- Wheel corner

- Small pot transfer rod

- Limit switch wireless

- Start/stop remote control

- Plug tray rack

In 2021, our conveyors reached Australia. You can have a look at their arrival in the image gallery. Thank you Taylor's Foliage Nursery for your trust & support!